Welcome to Multitech Machinery
Products Products
RECOMMEND /  
发布时间: 2018 - 08 - 03
Vertical clamping,vertical injection,easy to insert.SD-The integrated double slide table(1 upper mold,2 bottom mold).SDS-The split double slide table(1 upper mold,2 bottom mold).Double Slide Table design,increase production and more convenient.
发布时间: 2017 - 07 - 14
Vertical clamping ,vertical injection,easy to insert.R2:3-tie bar 2-station rotary table.R3:4-tie bar 3-station rotary table.Multit-stations rotary table(1 upper mold,2-4 bottom molds).increase production.
发布时间: 2017 - 07 - 15
CONTACT
P: 852 2796 9622
M: multitech@multitech-imm.com
   
产品列表
●  mV/mH series micro-injection unit included injection unit and independent floor type hydraulic and electric control unit. The portable control unit with casters can move fast and convenient.●  Any injection molding machine can be connected. Customers no longer need to invest two-color or tri-color machine and then realizes multi-material injection molding, optimize production systems and improve equipment utilization●  The equipment is small and exquisite; less occupying land area; energy saving; power is 4KW only.●  The construction of the injection molding unit is compact and can be installed directly onto the mould, either horizontally or vertically.●  Easy disassembly. After simple training, customer will be able to disasse...
●  Va series top-injection unit included injection unit and independent floor type hydraulic and electric control unit. The portable control unit with casters can move fast and convenient.●  Any injection molding machine can be connected. Customers no longer need to invest two-color or tri-color machine and then realizes multi-material injection molding, optimize production systems and improve equipment utilization●  Deputy injection unit in this series installed vertically in the fixed platen of the injection molding machine so as to save floor space ●  Easy disassembly. After simple training, customer will be able to disassemble and reinstall on any machines●  Deputy injection unit in this series offered variety of specification...
●  The injection unit, hydraulic and electric control unit of this deputy injection unit in this series integrated together can provide a simple and reasonable piping layout and structure●  Any injection molding machine can be connected. Customers no longer need to invest two-color or tri-color machine and then realizes multi-material injection molding, optimize production systems and improve equipment utilization●  Easy disassembly. After simple training, customer will be able to disassemble and reinstall on other press●  Deputy injection unit in this series installed directly onto the side of the injection molding machine horizontally. Since the height is quite low, it is not limited due to ceiling height restrictions.● Deputy i...
●  High efficiency gear transmission structure●  Self-lubricating wear-resistant surface with high wear-resistant film support, minimal friction and no need to add lubricating oil●  High precision servo motor-driven, fast and smooth rotation, the stop position is accurate●  The chrome-plate surface will be rust-proof, beautiful and durable.●  Simultaneous water transport device, can choose hydraulic, water, air and electrical circuit●  The special design turntable supporting structure effectively prevents the drooping forward of the turntable after being installed●  Mold positioning holes on platen can ensure precise location for mold installation●  Comes with self rotation turntable, you can choose the origina...
1.Single Slide table with full automation2.Auto insert & pick up                                     3. 8 cavity4. Montyly capacity 400-450k pcs.
1.a person may operate machine, low labor costs2.by replacing the mold to the production of different specifications zipper3.by two electronic scale adjustment switch mold and injection location
1. Machine has compact structure, small occupied space, than the traditional automatic LED continuous injection machine saves the area of 15%-20%, improve the use of vendors plant utilization2. Injection part adopts Multitech SPM single-cylinder injection system, as is the horizontal bar of injection structure, jet thrust directly acting on the screw, effectively avoids the traditional double cylinder injection action is not synchronous machine injection inertia big shortcoming, firing action more smoothly, effectively and improve the precision of injection3. Material guiding belt mechanism and a positioning mechanism adopts the special regulation of design,15-70mm metal band can be easily produced, without changing any parts, greatly expanded the utility of manufacturers fo...
33页次3/4HomePrevious1234NextTrailer
Your Request to Multitech:
  • *
  • *
  • *
Unit 28, 4/F., Blk. B, proficient Ind. Ctr., 4 Wang Kwun Road Kowlond Bay, Kowlond, Hong Kong.
multitech@multitech-imm.com
852-2796 9622
Copyright ©2017  Multitech Machinery (Shenzhen) Co., Ltd
犀牛云提供企业云服务