返回顶部
赠送免费大礼包 五十音学习视频+日语输入法+VIP免费试听权限+日语老师一对一答疑
  • 五十音学习视频
  • 日语输入法
  • VIP免费试听权限
  • 日语老师一对一答疑
  • 精品公开课 免费公开课、全年365天直播讲课、授课群会解答学习问题,赠送基础学习资料
    PRODUCTS / 产品展示 更多>>
    2017 - 07 - 05
    MT-GK series precision half closed loop injection molding machine series    Clamping Force: 50-430Ton Control Unit1.All major pressure,position,request etc.are under monitored by the use of Austria KEBA new high speed precision control system.The full automation of the whole machine is high and can completely guarantee the request for the stability of your product. 2.All major units equipped with Italy GEFRAN linear transducer and controlled by pressure sensor Injection Unit1.Double injection cylinders achieve the injection cylinder move in parallel .Internal design of...
    2017 - 07 - 14
    Vertical clamping, vertical injection,easy to insert.
    2017 - 07 - 14
    Vertical clamping,vertical injection,easy to insert.S-single slide table(1 upper mold,1 bottom mold).In-out table design,more convenient.
    2017 - 07 - 14
    Vertical clamping,vertical injection,easy to insert.SD-The integrated double slide table(1 upper mold,2 bottom mold).SDS-The split double slide table(1 upper mold,2 bottom mold).Double Slide Table design,increase production and more convenient.
    2017 - 07 - 14
    Vertical clamping ,vertical injection,easy to insert.R2:3-tie bar 2-station rotary table.R3:4-tie bar 3-station rotary table.Multit-stations rotary table(1 upper mold,2-4 bottom molds).increase production.  V035R2-GII.pdf  V055R2-GII.pdf  V035R3-GII.pdf  V085R2-GII.pdf  V055R3-GII.pdf  V085R3-GII.pdf  V120R2-GII.pdf  V160R2-GII.pdf  V120R3-GII.pdf  V160R3-GII.pdf  V200R2-GII.pdf  V200R3-GII.pdf  V250R2-MB.pdf  V320R2-MB.pdf
    2017 - 07 - 15
    C55.pdf C55SD.pdf C85.pdf C85SD.pdf
    2017 - 07 - 15
    H55S-GII.pdfH55-GII.pdfH55SD-GII.pdfH090-GII.pdfH090S-GII.pdfH90SD-GII.pdfH120SD-GII.pdfH120-GII.pdfH120S-GII.pdfH160SD-GII.pdfH160-GII.pdfH160S-GII.pdfH220-GII.pdfH220SD-GII.pdfH220S-GII.pdfH300-GII.pdfH300S-GII.pdfH300SD-GII.pdf
    2017 - 07 - 15
    H120R2-GII.pdfH055R2-GII.pdfH160R2-GII.pdfH220R2-GII.pdfH300R2-GII.pdfVH090R2-MB.pdfH055R3-GII.pdfH090R3-GII.pdfH120R3-GII.pdfH160R3-GII.pdfH220R3-GII.pdfH300R3-GII.pdf
    金牌讲师 具有丰富的线上授课经验,带领数万名日语学生脱离零基础
    Products / 产品展示 更多>>
    01
    2017 - 07 - 14
    产品名称: V standard series
    产品型号:
    Vertical clamping, vertical injection,easy to insert.
    02
    2017 - 07 - 14
    产品型号:
    Vertical clamping,vertical injection,easy to insert.S-single slide table(1 upper mold,1 bottom mold).In-out table design,more convenient.
    学员案例 学习日语12个月通过日本语能力考试N1等级,正准备前往日本留学
    联合产业 联合产业介绍
    • MT-GK series precision half closed loop injection molding machine series    Clamping Force: 50-430Ton Control Unit1.All major pressure,position,request etc.are under monitored by the use of Austria KEBA new high speed precision control system.The full automation of the whole machine is high and can completely guarantee the request for the stability of your product. 2.All major units equipped with Italy GEFRAN linear transducer and controlled by pressure sensor Injection Unit1.Double injection cylinders achieve the injection cylinder move in parallel .Internal design of...
    • Vertical clamping, vertical injection,easy to insert.
    • Vertical clamping,vertical injection,easy to insert.S-single slide table(1 upper mold,1 bottom mold).In-out table design,more convenient.
    • Vertical clamping,vertical injection,easy to insert.SD-The integrated double slide table(1 upper mold,2 bottom mold).SDS-The split double slide table(1 upper mold,2 bottom mold).Double Slide Table design,increase production and more convenient.
    • Vertical clamping ,vertical injection,easy to insert.R2:3-tie bar 2-station rotary table.R3:4-tie bar 3-station rotary table.Multit-stations rotary table(1 upper mold,2-4 bottom molds).increase production.  V035R2-GII.pdf  V055R2-GII.pdf  V035R3-GII.pdf  V085R2-GII.pdf  V055R3-GII.pdf  V085R3-GII.pdf  V120R2-GII.pdf  V160R2-GII.pdf  V120R3-GII.pdf  V160R3-GII.pdf  V200R2-GII.pdf  V200R3-GII.pdf  V250R2-MB.pdf  V320R2-MB.pdf
    • C55.pdf C55SD.pdf C85.pdf C85SD.pdf
    • H55S-GII.pdfH55-GII.pdfH55SD-GII.pdfH090-GII.pdfH090S-GII.pdfH90SD-GII.pdfH120SD-GII.pdfH120-GII.pdfH120S-GII.pdfH160SD-GII.pdfH160-GII.pdfH160S-GII.pdfH220-GII.pdfH220SD-GII.pdfH220S-GII.pdfH300-GII.pdfH300S-GII.pdfH300SD-GII.pdf
    • H120R2-GII.pdfH055R2-GII.pdfH160R2-GII.pdfH220R2-GII.pdfH300R2-GII.pdfVH090R2-MB.pdfH055R3-GII.pdfH090R3-GII.pdfH120R3-GII.pdfH160R3-GII.pdfH220R3-GII.pdfH300R3-GII.pdf
    • H160S-GⅡ-AGF-MB.pdf  V55-M-AT.pdf  V170-GII-2C-AT .pdf
    • V035S-GII-LSR.pdfV035SD-GII-LSR.pdfV035R2-GII-LSR.pdfV055SD-GII-LSR.pdfV055S-GII-LSR.pdfV055R2-GII-LSR.pdfV085SD-GII-LSR.pdfV085R2-GII-LSR.pdfV085S-GII-LSR.pdfV120S-GII-LSR.pdfV120R2-GII-LSR.pdfV120SD-GII-LSR.pdfV160S-GII-LSR.pdfV160R2-GII-LSR.pdfV160SD-GII-LSR.pdfV200S-GII-LSR.pdfV200SD-GII-LSR.pdfV200R2-GII-LSR.pdfMT-LSR:MT50-MB-LSR MB.pdfMT120-GK-LSR.pdfMT90-GK-LSR.pdf
    • V55SD-M-B-MB.pdfV035SD-GII-B.pdfV085R3-B-GII.pdfV085S-M-B.pdfV120-MB-B.pdfV85-MB-B.pdfV160-MB-B.pdf
    • 锁模力:120-500Ton1.直立合模,直立射出2. R2:3柱2站圆盘,R3:4柱3站圆盘3.两套独立射出单元由两组电机油泵提供动力,运行稳定可靠,并可同时做两个动作,减少周期时间,增加产能4.高效率齿轮转动圆盘由平面自润滑耐磨片承载,中央同步运水装置(水管可360度旋转),旋转快速,定位准确,表面镀铬防锈,美观,耐用5.选用此圆盘多功能双色机,不但使您双色产品多样化,模具成本低,还为您提供另一种新时代产品制作的新思考方向
    • Clamping Force:170-320Ton1. Vertical clamping, horizontal injection, easy to insert and Reducing the height of machine2. Rotary Table(2-3) Station Reduces Cycle Time and increase production3. Two sets of independent control of the injection unit so as to remain stable and reliable
    • Clamping Force:180Ton,330Ton,430TonHorizontal multi-color/material injection molding machine1.Use of Japan Omron or Austria KEBA the latest high speed Precision controller,with self-developed softwareProgram,has the good man-machine interaction performance2.Hydraulic system with Germany Bosch large flow,high response half closed loop proportional value and importPressure sensor,achieve precision half closed loop control.The overall system has the high response,the low noise and the low energy consumption as well as the extremely high repeat accuracy3.The complete machine is the modular design....
    • Clamping Force:180Ton,330Ton,430Ton1.High precision mode change devices and digital duplex two way 180 degree roating back and forth,used by servo motor will cause shift mold to be quick and smooth,positioning to be smooth and accurate.2.Two sets of independent proportion pressure/flow control oil circuit control two sets of injection system and ejector system,according to the characteristic of flexible settings to optimize the injection process,to ensure that the production of plastic products of high quality,low-cycle and thus has a stronger market competitiveness3. Turntable Movable te...
    • ●  mV/mH series micro-injection unit included injection unit and independent floor type hydraulic and electric control unit. The portable control unit with casters can move fast and convenient.●  Any injection molding machine can be connected. Customers no longer need to invest two-color or tri-color machine and then realizes multi-material injection molding, optimize production systems and improve equipment utilization●  The equipment is small and exquisite; less occupying land area; energy saving; power is 4KW only.●  The construction of the ...
    • ●  Va series top-injection unit included injection unit and independent floor type hydraulic and electric control unit. The portable control unit with casters can move fast and convenient.●  Any injection molding machine can be connected. Customers no longer need to invest two-color or tri-color machine and then realizes multi-material injection molding, optimize production systems and improve equipment utilization●  Deputy injection unit in this series installed vertically in the fixed platen of the injection molding machine so as to save floor space ●&...
    • ●  The injection unit, hydraulic and electric control unit of this deputy injection unit in this series integrated together can provide a simple and reasonable piping layout and structure●  Any injection molding machine can be connected. Customers no longer need to invest two-color or tri-color machine and then realizes multi-material injection molding, optimize production systems and improve equipment utilization●  Easy disassembly. After simple training, customer will be able to disassemble and reinstall on other press●  Deputy injection unit...
    • ●  High efficiency gear transmission structure●  Self-lubricating wear-resistant surface with high wear-resistant film support, minimal friction and no need to add lubricating oil●  High precision servo motor-driven, fast and smooth rotation, the stop position is accurate●  The chrome-plate surface will be rust-proof, beautiful and durable.●  Simultaneous water transport device, can choose hydraulic, water, air and electrical circuit●  The special design turntable supporting structure effectively prevents the drooping forward of the t...
    • 1.Single Slide table with full automation2.Auto insert & pick up                                     3. 8 cavity4. Montyly capacity 400-450k pcs.
    • 1.a person may operate machine, low labor costs2.by replacing the mold to the production of different specifications zipper3.by two electronic scale adjustment switch mold and injection location
    • 1. Machine has compact structure, small occupied space, than the traditional automatic LED continuous injection machine saves the area of 15%-20%, improve the use of vendors plant utilization2. Injection part adopts Multitech SPM single-cylinder injection system, as is the horizontal bar of injection structure, jet thrust directly acting on the screw, effectively avoids the traditional double cylinder injection action is not synchronous machine injection inertia big shortcoming, firing action more smoothly, effectively and improve the precision of injection3. Material guiding be...
    • 1. Stability of the hydraulic driving device[Bulk silica gel]2.With accurate and reliable metering screw plunger injection
    • [Printer]The machine adopts special design top-down injection device and nozzle leak-proof device, in the form of liquid silicone rubber roller to ensure its exhaust uniform superiority
    • LSR(LIM)vertical injection molding machine    Clamping force: 55-160Ton1. Multi-stage mold heater and temperature control.2. LSR special pneumatic sealing nozzle.3. Special LSR barrel and screw set.4. Insulation plate(standard:within 200°C).5. Rotary table or double slide tables design [1 upper mold,2 bottom mold], easy to pick-up. During heat curing, operator can make mold clean and insert, to increase the production.6. Special screw change and injection design to make more accurate screw charge.7. Optional vacuum device to prevent product with air bubble.
    • LSR Horizontal Injection Molding Machine    Clamping Force: 50 ~ 160T1. The clamping force can be more even because of direct clampingat the center design and lifetime of the platen can be extended. 2. Insulation plate(standard:within 200°C).3. Equipped with pneumatic sealing nozzle, air blow and ejector design.
    Your Request to Multitech:
    • Your name:
    • *
    • 公司名称:
    • *
    • 地址:
    • *
    • 电话:
    • *
    • 传真:
    • *
    • E-mail:
    • *
    • 邮政编码:
    • *
    • 留言主题:
    • *
    • 详细说明:
    • *
         
    Unit 74, 4/Fl. Sino Industrial Plaza, 9 Kai Cheung Road, Kowloon Bay, Hong Kong.
    multitech@multitech-imm.com
    0755-2722 2911
    Copyright ©2017  Multitech Machinery (Shenzhen) Co., Ltd
    犀牛云提供企业云服务